6915 Boul. Couture,

MONTRÉAL (SAINT-LÉONARD), QC H1P 3M6

514-327-9831

The expert in automation and control products

AC DRIVES

Control Techniques

Emerson

Unidrive M100 - M101

Economical and effective drive designed for open-loop applications

M101: potentiometer version

  • Easy and quick to install and configure
  • Easy-to-use fixed LED keypad.
  • The 10 most used parameters are listed on the front panel.
  • Use of an SD card with AI-Backup, Adaptor to copy and transfer
    parameters.
  • Open-loop vector mode or Volts/ Hertz, quick to configure with autocalibration.
  • Easy DIN rail mounting, up to 1.5 kW*.

115vac 1ph . 1/3-1.5hp

230vac 1ph . 1/3-3hp

230vac 3ph . 1/2-5hp

380-460vac 3ph . 1/2-10hp

Brochure

Unidrive M200-201

Flexible integration through communications

M-201: potentiometer version

Unidrive M200 is designed for applications that require flexible integration with
systems via Ethernet protocols and fieldbuses, and advanced Rotor Flux Control
(RFC-A) of open-loop motors.

Flexible integration with communication options
• The SI interface of the M200 enables its integration into a system via a
wide range of additional inputs/outputs or industry standard fieldbuses, such as
SI-Ethernet, SI-EtherCAT, SI-PROFINET RT, SI-PROFIBUS, SI-CANopen, and SIDeviceNet.
• The AI-485 Adaptor option enables connection to RS485 networks by using
Modbus RTU protocol.

Performance improvement with the advanced open-loop motor control algorithms
• The RFC-A (Rotor Flux Control) uses closed-loop current control to ensure maximum stability of induction motors at all power ranges.

Easy and quick to install and configure
• Easy-to-use fixed LED keypad.
• The most used parameters are listed on the front panel.
• Use of the Unidrive M Connect software or an SD card with AI-Backup Adaptor to copy and transfer parameters.
• DIN rail mounting supporting up to 1.5 kW*.

Common usage
Speed control for conveyors, fans, positive-displacement pumps and
mixers, whose functions are remotely controlled via fieldbus or Ethernet communications.

115vac 1ph . 1/3-1.5hp

230vac 1ph . 1/3-3hp

230vac 3ph . 1/2-100hp

380-460vac 3ph . 1/2-200hp

575vac 3ph . 3-150hp

690vac 3ph . 25-175hp

Unidrive M300

Integration through safety and flexible communications
Unidrive M300 is ideal for applications requiring a cost-effective integration into
safety systems and advanced Rotor Flux Control (RFC-A) of open-loop induction
motors.

Compliance with machinery standards, optimization of downtimes and reduction of costs thanks to its direct integration into safety systems
• M300 features two STO inputs to be SIL3/PLe compliant, by eliminating the need for external safety modules.


Increased productivity thanks to the advanced open-loop motor control
algorithms

• The RFC-A (Rotor Flux Control) ensuring maximum stability and control of
induction motors at all power ranges.
• 180% of motor overload suitable for heavy industrial machinery operations.

Flexible integration with
SI communication options

The SI interface of the M300 enables the integration of a wide range of industry standard fieldbuses and I/Os.

Easy and quick to install and configure
• Easy-to-use fixed LED keypad
• The most used parameters are listed on the front panel
• Use of the Unidrive M Connect software or an SD card with AI-Backup to copy and transfer parameters
• DIN rail mounting supporting up to 1.5 kW*

Common usage
Speed control for the transport of materials, cutting, woodworking, machine tools, operations requiring the protection of assets and people.

115vac 1ph . 1/3-1.5hp

230vac 1ph . 1/3-3hp

230vac 3ph . 1/2-100hp

380-460vac 3ph . 1/2-200hp

575vac 3ph . 3-150hp

690vac 3ph . 25-175hp

Reduced costs thanks to its direct integration capability
• Unidrive M600 features an on-board Programmable Logic Controller (PLC) which can run Engineering Control Studio (CEI61131-3) programs for automation systems, sequencing, speed monitoring and digital synchronization, without the need for additional PLCs.
• It allows the installation of up to three SI modules to enjoy safe movements, speed feedback, additional I/O and fieldbus communications

Unidrive M400

Fast set-up and diagnosis with alphanumeric display, integrated PLC and safety inputs

Unidrive M400 minimizes downtimes with its intuitive LCD keypad offering an alphanumeric, multilingual display for rapid set-up and more precise diagnoses. The integrated PLC can be used to carry out a wide range of sequencing and logic programs. With a great number of I/Os, two STO inputs and an SI interface for fieldbus or additional I/O, M400 guarantees flexible integration to all systems.

Reduction of set-up times and downtime thanks to the advanced functions of the keypad
• Alphanumeric, multilingual display and 3 lines of text for easy set-up and providing diagnostic information
• 4 keys for intuitive navigation and programming
• Available keypad options :

  •  CI-Keypad: drive-mounted LCD keypad
  • ➪Remote Keypad IP66: quick panel mount (1 hole, Ø 32 mm)
  • No keypad: control/programming carried out via a PC connection or fieldbus. Increased productivity thanks to the advanced open-loop motor control algorithms

Increased productivity with open loop advanced engine control algorithms
• RFC (Rotor Flux Control) control ensures stability and optimal control of asynchronous motors over the entire power range.
• 180% motor overload suitable for high-dynamic machine applications.
• Ability to track accurate speed from encoder or frequency / direction input.

Compliance with safety standards, optimization of machine downtime and reduction of costs through direct integration into safety systems
• The M400 includes two STO inputs to achieve SIL3 / PLe compliance, eliminating the need for external security modules.

Common usage
Speed control for conveyors, pumps, material handling, cutting, woodworking, and applications requiring quick diagnosis.The integrated PLC ensures intelligent exploitation of control applications for
industrial pumps, safety gates, and washing machines.

115vac 1ph . 1/3-1.5hp

230vac 1ph . 1/3-3hp

230vac 3ph . 1/2-100hp

380-460vac 3ph . 1/2-200hp

575vac 3ph . 3-150hp

690vac 3ph . 25-175hp

Unidrive M600

High-performance drive for induction and sensorless permanent magnet motors

M600 is ideal for all applications which require a high-performance open-loop control of induction or permanent magnet motors. Optional modules for SIEncoder/SI-Universal Encoder are available for closed-loop speed applications requiring more accuracy and in the event of digital synchronization/ frequency monitoring of induction motors.

Advantages of Unidrive M600 :
Improvement in productivity with high-performance open-loop control of induction and permanent magnet motors

• RFC-A (Advanced Rotor Flux Control) ensuring optimum stability and control of induction and permanent magnet motors.
• Up to 200% of motor overload for heavy industrial machinery operations.

Reduced costs thanks to its direct integration capability
• Unidrive M600 features an on-board Programmable Logic Controller (PLC) which can run Engineering Control Studio (CEI61131-3) programs for automation systems, sequencing, speed monitoring and digital synchronization, without the need for additional PLCs.
• It allows the installation of up to three SI modules to enjoy safe movements, speed feedback, additional I/O and fieldbus communications

Typical applications
Speed control with high starting torque for extruders, slitters, conveyors,
compressors, lifting cranes, hydraulic system replacement, synchronization, rewinders (spoolers), handling of paper strips and metal cutting. A permanent magnet motor in sensorless mode can be used to achieve energy savings in fan and pump applications.

230vac 3ph . 1/2-150hp

380-460vac 3ph . 2-450hp

575vac 3ph . 3-350hp

690vac 3ph . 25-400hp

Unidrive M700 - M701

Class-leading performance for induction motors, permanent magnet motors and servo-motors with on-board real-time Ethernet

Unidrive M700 ensures efficient motor control while offering exceptional control flexibility in order to meet the requirements of machine builders and high specifications of industrial and hoisting applications. Unidrive M700 is a direct and improved replacement of Unidrive SP.

M701 : Modbus RTU version

Increased productivity of machines with superior motor control
• High bandwidth motor control algorithms for closed-loop induction motors, permanent magnet motors, and servo-motors, up to 3000 Hz current-loop bandwidth and 250 Hz speed-loop bandwidth.
• Flexible speed and position feedback interface supporting a wide range of speed/position feedback technologies, from robust resolvers to high-resolution encoders.

  •  Up to three encoder channels simultaneously (for example, 1 feedback encoder, 1 reference encoder and 1 simulated output)
  •  Quadrature encoders, SinCos (including absolute), SSI, EnDat (up  to 4 MBauds with EnDat 2.2 and 100 m of cable where line compensation is supported) and resolvers
  • Simulated encoder output to provide position reference for cams and digital synchronization

Performance optimization with the integrated advanced motion controller
• Unidrive M700 is equipped with an advanced motion controller capable of
controlling 1.5 axes. The motion functions are directly integrated into the drive, which optimizes performance.

Flexible design of control systems in centralized or decentralized configuration
• On-board PLC for logic programs.
• Possibility of adding MCi modules for multiprocessing offering powerful
programming capacities.
• Engineering Control Studio software is an industry standard CEI 61131-3
programming environment guaranteeing the rapid design and configuration of systems.
• Integrated dual port Ethernet switch enabling easy connectivity with basic
standard connections.
• On-board real-time Ethernet (IEEE 1588 V2) using RTMoE (Real Time Motion over Ethernet) to ensure fast communication and accurate axis synchronization.
• Three SI ports (System Integration) available for implementing additional
fieldbus, position feedback, and I/O options.


Compliance with safety standards, optimization of machine availability time and cost reduction thanks to its direct integration into safety systems
• Unidrive M700 features one integrated STO (Safe Torque Off) input and can accommodate an SI-Safety module for safe motion functions.

Typical applications
Speed and position control for positioning, synchronization, winding, handling of paper strips, metal cutting, cutting to length, rotary-cutting machines, test benches, printing, filling and packaging machines, textile, woodworking, tire manufacturing, hoisting devices for stage equipment, cranes.


Unidrive M701 - Direct replacement of Unidrive SP
Unidrive M701 includes 2 integrated RS485 ports instead of Ethernet, which makes it the ideal substitute for the Unidrive SP. Parameter sets can be transferred to Unidrive M using a Smartcard or Unidrive M Connect software. SM-Applications software can be recompiled for SI-Applications in Unidrive M.


Unidrive M702 - Enhanced Safety
M702 features an additional STO input for applications requiring integrated
Ethernet and two STO inputs in order to be SIL 3 or PLe compliant.

230vac 3ph . 1.5-1000hp

380-460vac 3ph . 2-2000hp

575vac 3ph . 3-2000hp

690vac 3ph . 25-2000hp

Unidrive SP

The ultimate AC drive

High-performance and flexible technologies give you an advantage in the implementation of innovative projects, by creating opportunities for innovation,
identification of better control methods for your applications, speed increase,
process improvement and system footprint reduction. The Unidrive SP line of
intelligent, high-performance drives from Control Techniques offers all these
advantages.

A product for all power ranges
Unidrive SP is a complete range of drives for automation, with powers ranging from 0.37 kW to 1.9 MW. All drives share the same flexible control interface, regardless of their power rating. The different models are available in three versions: panel mount, free-standing and modular.

Panel mount: standard drive modules of 0.37 kW to 132 kWUnidrive SP panel mount drives are standard AC input and AC output modules
designed for installation within a control cabinet. The modules are easy to install and commission, and can be used for a wide range of applications.

Free-standing: ready-to-run drives of 90 kW to 675 kWUnidrive SP Free-Standing drive is a turnkey solution with a fully-equipped drive
installed in a standard-sized cabinet. These free-standing models can be ordered equipped with all necessary equipment so as to allow a direct implementation and immediate connection to the motor and power supply.

Unidrive SP Modular: power system flexibility of 45 kW to 1.9 MW
Unidrive SP Modular offers maximum power system design flexibility. The drive modules can be connected in multiple ways so as to create common DC bus systems, activate feed systems for returning surplus energy to the power grid and enable installation of parallel drives for high-power motors. All drive modules are compact and therefore easy to handle.

  • 1.5 to 1000 HP 3 inputs, 208-250 VAC
  • 1.5 to 2000 HP 3 inputs, 380-480 VAC
  • 5 to 2000 HP 3 inputs, 575 VAC
  • 25 to 200 HP 3 inputs, 690 VAC

Danfoss

VLT® HVAC Drive FC 102

Life-cycle costs reduced to a minimum for air-conditioning applications

Features and benefits

  • External cooling or oversizing is not required, as the maximum ambient temperature is 50 °C without derating
  • The need for PLC capacity is often unnecessary thanks to the advanced logic controller
  • Low initial investment cost and easy upgrades thanks to a modular design offering a wide range of options
  • integrated pump, fan and compressor functionalities
  • From 5 to 15% energy savings can be achieved with the automatic energy optimization functionality
  • Fewer gateway solutions required with a vast range of HVAC protocols enabling the connectivity of the management system controller
  • EMC compliant in accordance with IEC 61800-3 C1 Category with a 50 m motor cable meaning that no external filters are required. Compliance with C1 category is achieved by correctly connecting the motor cable to the motor terminal
  • The Smart Start Assistant reduces commissioning time by guiding the user through the installation process in an easily understandable language
  • The user interface is the same for all power ratings from 1.1 to 1400 kW. Programming an FC 102 drive of 1.4 MW is quite as easy as for a 3 kW drive
  • The NABERS compliant integrated energy meter minimizes the need for an external energy meter
  • The Modbus and BACnet BTL fieldbuses are integrated to the entire VLT® HVAC Drive FC 102 line

Applications

Pumps, fans, compressors.
Supply voltages and power range

3 x 200-240 V...1,1-45 kW

3 x 380-480 V...1,1 kW – 1 MW

3 x 525-600 V...1,1-90 kW

3 x 525-690 V...45 kW – 1,4 MW

VLT® AQUA Drive FC 202

Maximum energy effectiveness for applications related to water and wastewater treatment

Features and benefits

  • Facilities are protected by a specific software which prevents, for example, water hammering.
  • Energy efficiency is maximized by the drives’ control algorithms, and their design focused on reducing heat loss
  • High energy savings related to air-conditioning are ensured thanks to the unique back-channel-cooling design which enables the transfer of up to 90% of the heat away from the room
  • Electromagnetic interferences and harmonic distortion are reduced thanks to the built-in, scalable RFI filter, and integrated DC link chokes.
  • Perfect system integration and adaptation to the application guaranteed thanks to freely programmable warnings and alerts
  • Between 3 and 8% energy savings can be achieved with the automatic energy optimization functionality

Applications

Centrifugal pumps and blowers, positive displacement blowers.

Supply voltages and power range
​​​

1 x 200-240 V...1,1-22 kW

1 x 380-480 V...7,5-37 kW

3 x 200-240 V...0,25-45 kW

3 x 380-480 V...0,37 kW – 1 MW 

3 x 525-600 V...0,75-90 kW

3 x 525-690 V...45 kW – 1,4 MW

FC 300

Extremely flexible and suitable for all industrial applications, from basic speed control to dynamic servo applications.

Features and benefits

  • External cooling or oversizing is not as much required, as the maximum ambient temperature is 50 °C, without derating
  • The need for PLC capacity is reduced thanks to the advanced logic controller
  • The costs related to a short life expectancy are reduced, as the drive is highly resistant to wear and tear

Applications

CConveyors, positioning and synchronizing, cranes, mixers, centrifuges and palletizing and packaging machinery.

Supply voltages and power range

3 x 200-240 V...0,25-37 kW

3 x 380-500 V...0,37 kW – 1,1 MW

3 x 525-600 V...0,75-75 kW

3 x 525-690 V...1,1 kW – 1,4 MW

  • The service life of electronics is extended thanks to the back-channel cooling for enclosures D, E and F
  • Commissioning and upgrades are easily carried out thanks to the plug-in technology
  • High-precision position and synchronization thanks to the availability of an Integrated Motion Controller throughout the entire product line
  • Features such as intelligent heat management and Safe Torque Off ensure a safe and energy-efficient operation of the drive

Micro drive

The VLT Micro Drive is used for general purposes and can control AC motors of up to 7.5 kW. It is a small yet powerful drive which is built to last.

2800 series

An extremely compact series designed for side-by-side mounting developed specifically for the low power market segment.

Weg

cfw11

An extremely compact series designed for side-by-side mounting developed specifically for the low power market segment.

CFW700

The new CFW700 drive strengthens an already existing wide product range. This low-voltage frequency drive with a power range of 0.75 kW to 110 kW in IP 20 is an all-in-one system :
• Designed for installation in environments of up to 50 °C without derating
• Plug and play technology
• Standard RFI filter
• Integrated DC bus choke
• Safety Stop
• Integrated RS485 (Modbus)
• Flash memory - actual “black box” of the drive
• Tropicalized (conformal coating) electronic board
• Integrated encoder management
• Application software (Multi-pump, Hoisting, rewinder…)
• Built-in soft-PLC function
• Adjustable motor overload protection
• Optimal Flux VVW Control

The CFW700 is an economic drive integrating all the functionalities expected from OEM integrators looking for a product which is easy and straightforward to implement. The expertise of WEG in motor control offers an “all-in-one” product with a very robust design allowing it to meet a wide variety of applications.

Applications

The CFW700 is easy to configure, and integrates to all types of application as well as offers powerful functions: PID controllers, flying start or restart function… This CFW700 frequency drive gives access to WEG application software for pump, hoisting, and winding. The “Optimal Flux VVW” motor control offers the possibility, for constant torque applications, of a specific motor-drive package design with, in particular, an optimization of the motor size.